FinishPro II 595 PC Pro
Air-Assisted Airless Sprayer
The most versatile FinishPro sprayer ever, with more performance to get the job done faster.
The most versatile FinishPro™ II sprayer ever, with more performance to get the job done faster, the FinishPro II 595 PC Pro is ideal for large commercial and industrial jobs.
- Moderate Commercial
- Property Maintenance
- Residential - Fine Finish
- Wood Finishing - Spraying
ProConnect™
- Fast and easy on-the-job Pump Replacement System
- 1-minute jobsite replacement in 3 simple steps
- Pinless design eliminates the chance of losing parts during the change-out process
- Endurance™ Now program available
SmartComp™
- Compressor is activated by the gun trigger—if you’re not spraying, it’s not running!
- Reduces jobsite noise, resulting in less fatigue
- Automatic shut-off reduces moisture entering the system and extends compressor life
- Pulling trigger delivers instant air to the gun with zero lag
- Release the trigger and SmartComp shuts off the compressor after 5 seconds
- Extends compressor life
High-Output On-Board Air Compressor
- Ideal for on-site finish jobs
- Delivers 3.2 cfm at 35 psi—enough air to break up the heaviest of materials
- Exclusive Pressure Unloader results in quieter operation
- Cooling coil reduces air temperature, extending the life of the critical compontents and providing safer operator handling
Endurance™ Pump
- The most reliable pump on the market—lasts 2 times longer than the next leading brand
- Long-life V-Max Blue™ packings, Chromex™ rod and hardened stainless steel cylinder
- QuikAccess™ intake valve for fast cleaning or debris clearing
Super-Flex™-Hose Set By increasing flexibility and maneuverability, Graco’s Super-Flex Hose Set enables you to work in tight confines and helps you increase the quality of finish you’re laying down.
- The flexibility to get into tight spaces—focus on the task, not the tool!
- Extremely lightweight in hand, which reduces fatigue
- Connects directly to the gun for maximum flexibility
- Flex Wrap hose skin protects from paint build up and increases hose durability
Improved G40 Spray Gun
- An industrial quality air-assisted spray gun that delivers superior finishing results
- Integrated air valve improves gun handling
- RAC X™ air cap included
- Flat tip conversion kit included
SmartControl™ 2.5
- Advanced technology delivers a consistent spray fan without pressure fluctuations at all spraying pressures
- Ideal for smaller tips commonly used for fine finish work
- Digital display accurately shows spraying pressure
FastFlush™ High-flow cleaning system runs faster and dramatically reduces cleaning time
Two Sprayers in One!
- Select air-assisted or airless modes, depending on what’s best for the application
Self-Contained & Portable
- One plug runs the entire unit, simplifying jobsite operation
Single Selector Switch
- Simple, color-coded labels easily identify airless and air-assisted modes
Includes:
- G40 Gun Air-Assisted Airless Gun
- 50 ft Super Flex Hose Set
- 1/4 in x 50 ft (6.4 mm x 15.2 m) Fluid Hose
- 1/8 in x 6 ft (3.2 mm x 1.8 m) Fluid Whip Hose
- 3/8 in x 50 ft (9.5 mm x 15.2 m) Air Hose
- 1/4 in x 6 ft (6.4 mm x 1.8 m) Air Whip Hose
- RAC X FFT210 SwitchTip
- RAC X LTX517 SwitchTip
- Precision Cut Fine Finish Flat Tip Kit
- AAM309 Flat Tip
- 100 Mesh Gun Filter
FinishPro II 595 PC Pro Airless/Air-Assisted Sprayer, 17C424, 17C357, 17C423, 17C358 | |
Sprayer | |
Power requirements |
◆ 230V AC, 50/60 Hz, 10A, 1Ø
|
Generator Minimum |
4000 W
|
Maximum Tip Size |
0.027
|
Maximum material output gpm (lpm) | |
US★ / UK★ |
2.6 lpm
|
Europe◆ / Asia/Australia◆ |
2.6 lpm
|
Maximum material pressure — Airless | |
US★ |
228 bar, 22.8 MPa
|
UK★ |
193 bar, 19.3 MPa
|
Europe◆ / Asia/Australia◆ |
228 bar, 22.8 MPa
|
Maximum material pressure — AA | |
US★ / UK★ |
193 bar, 19.3 MPa
|
Europe◆ / Asia/Australia◆ |
228 bar, 22.8 MPa
|
Atomizing air output | |
US★ / UK★ |
3.2 cfm
|
Europe◆ / Asia/Australia◆ |
2.9 cfm
|
Air pressure |
2.4 bar
|
Dimensions | |
Length |
82.5 cm
|
Width |
53.3 cm
|
Height |
102.8 cm
|
Weight (bare) |
50.8kg
|
Noise** (dBa) level at 70 psi (4.8 bar, 0.48 MPa) | |
Sound pressure |
79 dBa
|
Sound power |
96 dBa
|
Materials of Construction. | |
Pump motor |
1.4 HP Brushless
|
Compressor motor |
1.0 HP AC Induction
|
Material hose |
1/4 in. x 15.2 m (blue)
|
Air hose |
3/8 in. x 15.2 m (clear)
|
Gun |
G40 w RAC X tip
|
Wetted materials on all models |
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, polyethylene, fluoroelastomer, urethane
|
Notes | |
* Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Sound pressure measured 3 feet (1 meter) from equipment. Sound power measured per ISO-3744. |
- Painting & Texture Contractors - Residential
- Architectural Trim and Molding Manufacturing