Pro Xp60 AA Electrostatic Spray Guns

Electrostatic Air-Assist Guns Deliver Expert Performance

Pro Xp60 kV air-assist gun is the smallest and lightest electrostatic air-assist gun on the market – delivering a consistent, high quality finish every time you spray

Our improved tip line delivers a high quality finish for a variety of applications. Plus, the pre-orifice tips atomize paints for fine finish applications. Pro Xp60 AA gun line includes Standard, Smart and Waterborne models.

  • Light Commercial Painting
  • Moderate Commercial
  • General Metal Finishing - Spraying
  • Plastic Finishing - Spraying
  • High quality spray performance with a one-piece aircap and variety of spray tips
  • Transfer efficiency is improved over conventional air-assist guns
  • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Made in USA
  • The smallest profile gun with internal power supply on the market – 1 inch (2.5 cm) shorter and 4 oz (110 g) lighter
  • Fan adjust pattern control reduces overspray by changing the fan pattern width according to the size of the part – improving quality and saving you money
  • Rugged, dependable design supported by a three year warranty
  • Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

Electrostatic Air-Assisted Spray Guns
Maximum Working Fluid Pressure
21 MPa, 210 bar
Maximum Working Air Pressure
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
48°C
Paint Resistivity Range
3 megohm/cm to infinity
Air Inlet Fitting
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
1/4–18 npsm(m)
Output Voltage
Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
Maximum Current Draw
125 microamperes
Sound Power (measured per ISO Standard 9216)
at 0.28 MPa, 2.8 bar: 88.9 dB(A) at 0.7 MPa, 7.0 bar: 99.7 dB(A)
Sound Pressure (measured 1 m from gun)
at 0.28 MPa, 2.8 bar: 86.0 dB(A) at 0.7 MPa, 7.0 bar: 95.0 dB(A)
Wetted Parts
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
  • Agriculture Equipment - Manufacturing
  • Spray Booths
  • Construction Equipment - Manufacturing
  • CARC
  • Automotive Electronics
  • Consumer Electronics
  • Furniture Finishing / Manufacturing
  • General Metal Finishing / Manufacturing
  • Wood Products Manufacturing
  • Marine
  • Railroads
  • Trucking
  • Fleets
  • Waste Management - Equipment Manufacturing
  • Personal Recreation Vehicles
  • RVs
  • Aerospace - Finishing
  • Heavy Equipment Manufacturing
  • Forestry Equipment