Pro Xp Auto Air Spray Electrostatic Spray Guns

Automatic Electrostatic Air Spray Guns

Ideal for low pressure, high quality spraying. Easy modular installation without the need for electrical connections.

Get the spray performance and transfer efficiency of our manual Pro Xp guns in an automatic version. They’re smaller, lighter and designed to maximize your profits. Every automatic Pro Xp gun is tested and delivered with a certificate indicating it meets all of Graco’s requirements for spray pattern, mechanical performance and electrical performance so you’re getting a quality product.

General Metal Finishing - Spraying
Plastic Finishing - Spraying
Automotive Finishing - Painting

Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
85 kV power supply and internal power so there’s no electrical cord to worry about damaging or replacing
Higher transfer efficiency equals less waste, saving you money on material
Made in USA
Durable components reduce cost of ownership, supported by a three year warranty

Pro Xp Auto Air Electrostatic Spray Gun
Maximum fluid working pressure	100 psi 0.7 MPa, 7 bar
Maximum working air pressure	100 psi 0.7 MPa, 7 bar
Maximum fluid operating temperature	120°F 48°C
Short circuit current output	125 microamperes 125 microamperes
Paint resistivity range	3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels see, Check Fluid Resistivity, see instruction manual. 3 megohm/cm to infinity. For a table of electrostatic results at different resistance levels see, Check Fluid Resistivity, see instruction manual.
Gun Weight	2.6 lb 1.2 kg
Voltage Output
Standard Models	85 kV 85 kV
Smart Models	40-85 kV 40-85 kV
Noise (dBa)
Sound Power (measured per ISO 9216 Standard	at 40 psi: 90.4 dB(A) at 100 psi: 105.4 dB(A) at 0.28 MPa, 2.8 bar: 90.4 dB(A) at 0.7 MPa, 7 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)	at 40 psi: 87 dB(A) at 100 psi: 99 dB(A) at 0.28 MPa, 2.8 bar: 87 dB(A) at 0.7 MPa, 7 bar: 99 dB(A)
Inlet/Outlet Sizes
Turbine air inlet fitting, left-hand thread	1/4 npsm(m) 1/4 npsm(m)
Atomizing air inlet fitting	5/16 in. OD nylon tube (8 mm) 5/16 in. OD nylon tube (8 mm)
Fan air inlet fitting	5/16 in. OD nylon tube (8 mm) 5/16 in. OD nylon tube (8 mm)
Cylinder air inlet fitting	5/32 in. OD nylon tube (4 mm) 5/32 in. OD nylon tube (4 mm)
Fluid inlet fitting	1/4-18 npsm(m) 1/4-18 npsm(m)
Materials of Construction
Wetted Parts	Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene

Spray Booths
Construction and Infrastructure
Automotive Electronics
Consumer Electronics
General Metal Finishing / Manufacturing
Wood Products Manufacturing
Marine
Railroads
Trucking
Fleets
Heavy Equipment Manufacturing

Name*
Company Name
Email*
Phone*
Country*
State*
Message*